Set of 2 used 'DynaGrip' gripshift gear shifters for 18 speed mountain bikes (3 sprocket chainwheel with 6 sprocket rear cassette).
The right-hand shifter is a 6 speed indexed shifter for operating an index-compatible rear mech (Falcon MLG-26i)
The left-hand shifter is a non-indexed, high to low shifter for the front mech (Falcon MLG-2Li)
The shifters have attached cable inners and are equipped with screw adjuster for the cable outer tension.
They fit 22mm handlebars and attach by allen bolt tightening.
They are in fair used condition, with some wear to the rubber grips and the printed legend on the shifters. The cables have been cut so may need to be replaced if you are fitting to a larger bike - they were fitted to a men's full suspension mountain bike with 26" wheel and a 'pull down' front mech, but the length of cable needed will depend on your setup. They have come straight off my bike. The ends of the cables are a bit frayed so will need new end caps.
Please remember these are used parts at a bargain starting price - they are sold as seen with no guarantees, but are being sold due to upgrade of my own bike and were working before removal last weekend.