DBX DriveRack 260 Digital Processor Loudspeaker Management .
DBX DriveRack 260
Loudspeaker Management System
Perfect Condition!
Authorized Dealer
- Feedback Elimination
- 2.7 Seconds of Alignment and Zone Delay
- RS-232
PC GUI control
- Classic dbx Compression and Limiting
- Graphic and Parametric EQ
- Auto-EQ Function
- Full Bandpass, Crossover, and Routing Configurations
- Auto Gain Control
- Pink Noise Generator and fulltime RTA
- Setup Wizard with JBL speaker and Crown Power
Amplifier Tunings
- Security Lockout
- Wall Panel Control Inputs
There is a reason that Tour Sound Professionals and discriminating
Audio Contractors choose dbx® DriveRack® products for their high-end
tours and installs. The DriveRack products provide the tools that ensure
that the system sounds its very best. With the introduction of the new
260, the heritage of unrivaled system/loudspeaker control continues.
The 260 capitalizes on the road tested and contractor approved nature of
the other products in the DriveRack line. The 260 provides full
bandpass and crossover configurations as well as independent output
processing and a full time RTA for live sound applications. Contractors
will appreciate its control inputs for wall-panel logic control and the
patent-pending Advanced Feedback Suppression (AFS™).
The DriveRack 260 continues the legacy of DriveRack series, which has
been created by the company that has been redefining the standard of
signal processing for more than 30 years. The DriveRack 260 was designed
with the purpose and vision of providing state-of-the-art signal
processing, while utilizing a simple and intuitive user interface. This
goal has been achieved by offering two independent channels of
processing power with a linkable 28-Band Graphic Equalizer,
industry-standard dbx stereo compressor module, feedback eliminator and
the 120A Subharmonic Synthesizer on the input, with a six channel output
system that includes parametric EQs, PeakStopPlus® limiters (to provide
protection against speaker blowouts) and alignment delay. These
features combined with the Wizard setup system and complete DriveWare™
GUI control represent a methodical design that is guaranteed to deliver
optimal, all-inclusive processing in a completely scalable system.
Inputs
Number of Inputs:
(2) Line inputs. (1) RTA Mic input
Connectors:
(2) Female XLR line inputs. XLR RTA Mic input
Type:Electronically balanced/RF filtered
Impedance:>40k ohm
Maximum Input Level: +30dBu with input jumpers in +30 position
CMRR: >45 dB
RTA Mic Phantom Voltage: +15 VDC
RTA Mic ETN:<-110 dBu, 22 Hz - 22 kHz, 150 ohm
Analog Outputs
Number of Outputs: 6
Connectors: Male XLR
Type:Electronically balanced, RF filtered
Impedance:120ohm
Max Output Level: +22dBu
A/D Performance
Type: dbx Type IV™ Conversion System
Dynamic Range line: >114 dB A-weighted,
>112 dB unweighted
Type IV™ dynamic
range: >119 dB, A-weighted, 22kHz BW
>117 dB, A-weighted, 22kHz BW
Sample Rate: 48kHz
D/A Performance
Dynamic Range: 112 dB A-unweighted, 110 dB unweighted
System Performance
Dynamic Range: 110 dB unweighted, >107 dB weighted
THD + Noise:0.002% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response: 20 Hz - 20 kHz, +/-0.5 dB
Interchannel Crosstalk: >110 dB, 120 dB typical
Crosstalk input-output: >100 dB